1
1. 10-inch semi-pneumatic rubber tires for easy mobility and obstacle clearance
2
2. 1-inch drain plug allows quick and easy cleaning of tank
3
3. Switch boxes contain the motor on/off switch and the heat on/off switch which both have green indicator lights, and a red low fluid indicator light
4
4. Commercial-grade Baldor motor with 1/2 HP service factor and a thermal protection switch
5
5. Two grommet holes for the hoses to pass through thus preventing damage from vibration
6
6. Hydraulic purge valve meets OSHA requirements by preventing ATF vapors in the environment and prolongs the life of the filters and fluid
7
7. Improved deeper plastic tool tray reduces noise and holds tools and adapters for the flusher
8
8. 6-feet of hose with quick disconnect couplings
9
9. 4 GPM flow meter shows actual flow through cooler lines and reports any system blockage or restriction, alerting user when to add an external radiator
10
10. Dual filter mount holds 2 non-bypass automotive-style filters
11
11. G-Tec filters (17 micron) equipped with a magnet on the bottom to pull all the ferrous metal out of the flushing solution
12
12. Tower vent must be used with the Air Purge Adapter (APA) to vent injected air safely into the atmosphere
13
13. 6-feet of hose with quick disconnect couplings
14
14. Longer handle for easy mobility
15
15. 1-inch temperature gauge displays monitoring from 0-220 degrees
16
16. 10-gallon low profile all-steel tank, powder-coated for lasting durability
17
17. Adjustable (0-199 degrees) internal immersion heater allows flushing of systems requiring dual temp. ranges, such as Ford & Nissan Platforms
18
18. Low fluid level float switch turns heater power off when fluid level drops, activating red warning light on switch box
19
19. Line fittings adapt the flusher to most US vehicle’s cooler lines (see Parts page for full description)
20
20. On left side: Air Purge Adapter, PSI Relief Valve, and Pump
21
21. Manual Reverse
Click Here!
Click Here!